Current Dispatch Time: 1–2 Weeks (High Demand)
Note: Rear wing and crossbars are sold separately.
Shipping inclued in price.
Set your build up right with these 80 Series Rail Sides, designed to suit Tier One-style systems and provide a strong, low-profile foundation for your roof setup.
Now available in a premium 304 stainless steel option, offering improved durability and corrosion resistance while still finished in a satin black powder coat. Same proven design — just upgraded materials for those wanting long-term reliability.
These rails sit tight to the roof, giving you that clean, aggressive look without the bulk of traditional roof racks.
Approx. 25mm off the roof
As low as 10–15mm clearance when paired with crossbars
Ideal for low-profile rooftop tent setups
Whether you’re running a minimal setup or building a full touring rig, these rails give you the flexibility to make it happen.
These rails are part of a modular setup, allowing you to:
Mount your rooftop tent directly for the lowest profile
Add crossbars for extra versatility
Fit a rear wing later for a cleaner look and improved weather protection
Adding a rear wing also helps eliminate the gap between your awning and tent — reducing water getting through in rough conditions.
Designed to suit a wide range of setups:
Low Profile Light-Duty Crossbars
Lightweight, practical, and perfect for everyday use
Heavy-Duty RHS Crossbars (Low Profile)
Sits between rails for a super low stance
High-Profile Aluminium T-Slot Bars (80×25mm)
Ideal for heavier loads and modular accessories
Platform Racks
Compatible with setups like OCAM (some drilling may be required)
Direct Tent Mounting
Lowest profile option (may require minor modifications)
Passenger-side rail comes pre-drilled with 3 awning mounting points, fitted with flush rivnuts for quick and easy install — no mucking around.
3mm stainless steel construction
Satin black powder-coated finish
Designed to handle harsh Australian conditions
Also available in raw stainless steel if you’re chasing a custom finish.
This listing is for rail sides only
Rear wing and crossbars are sold separately
System is not currently load-rated — always check your tent/rack specs before installing
Internal rail width:
1125mm (front)
1120mm (rear)
Pre-drilled to suit OCAM platform racks
Most rooftop tents can be mounted directly
Compatible with setups like CSS 1.2X tents
Supplied hardware:
20mm bolts (ideal for racks/thin bases)
Longer bolts may be required depending on setup
Top Rail Length: 2080mm
Overall Length: 2185mm
External Width:
1255mm (front)
1250mm (rear)
Top Rail Width: 65mm
Roof Clearance: Approx. 25mm
Material: 3mm Stainless Steel
Finish: Satin Black Powder Coat
Hardware: 304 Stainless Steel
Weight: 12.5kg (pair)
Included: Rubber pinch weld + mounting hardware
Not sure if this setup suits your rig?
Reach out and we’ll help you get it sorted before you buy — saves headaches later.
This product must be installed correctly and used as intended.
Always check compatibility with your rooftop tent or rack manufacturer before installation.
Current Dispatch Time: 1–2 Weeks (High Demand)
Note: Rear wing and crossbars are sold separately.
Shipping inclued in price.
Set your build up right with these 80 Series Rail Sides, designed to suit Tier One-style systems and provide a strong, low-profile foundation for your roof setup.
Now available in a premium 304 stainless steel option, offering improved durability and corrosion resistance while still finished in a satin black powder coat. Same proven design — just upgraded materials for those wanting long-term reliability.
These rails sit tight to the roof, giving you that clean, aggressive look without the bulk of traditional roof racks.
Approx. 25mm off the roof
As low as 10–15mm clearance when paired with crossbars
Ideal for low-profile rooftop tent setups
Whether you’re running a minimal setup or building a full touring rig, these rails give you the flexibility to make it happen.
These rails are part of a modular setup, allowing you to:
Mount your rooftop tent directly for the lowest profile
Add crossbars for extra versatility
Fit a rear wing later for a cleaner look and improved weather protection
Adding a rear wing also helps eliminate the gap between your awning and tent — reducing water getting through in rough conditions.
Designed to suit a wide range of setups:
Low Profile Light-Duty Crossbars
Lightweight, practical, and perfect for everyday use
Heavy-Duty RHS Crossbars (Low Profile)
Sits between rails for a super low stance
High-Profile Aluminium T-Slot Bars (80×25mm)
Ideal for heavier loads and modular accessories
Platform Racks
Compatible with setups like OCAM (some drilling may be required)
Direct Tent Mounting
Lowest profile option (may require minor modifications)
Passenger-side rail comes pre-drilled with 3 awning mounting points, fitted with flush rivnuts for quick and easy install — no mucking around.
3mm stainless steel construction
Satin black powder-coated finish
Designed to handle harsh Australian conditions
Also available in raw stainless steel if you’re chasing a custom finish.
This listing is for rail sides only
Rear wing and crossbars are sold separately
System is not currently load-rated — always check your tent/rack specs before installing
Internal rail width:
1125mm (front)
1120mm (rear)
Pre-drilled to suit OCAM platform racks
Most rooftop tents can be mounted directly
Compatible with setups like CSS 1.2X tents
Supplied hardware:
20mm bolts (ideal for racks/thin bases)
Longer bolts may be required depending on setup
Top Rail Length: 2080mm
Overall Length: 2185mm
External Width:
1255mm (front)
1250mm (rear)
Top Rail Width: 65mm
Roof Clearance: Approx. 25mm
Material: 3mm Stainless Steel
Finish: Satin Black Powder Coat
Hardware: 304 Stainless Steel
Weight: 12.5kg (pair)
Included: Rubber pinch weld + mounting hardware
Not sure if this setup suits your rig?
Reach out and we’ll help you get it sorted before you buy — saves headaches later.
This product must be installed correctly and used as intended.
Always check compatibility with your rooftop tent or rack manufacturer before installation.
