Current Dispatch Time: 4-6 Week Production Lead Time (High Demand)
Note: Rear wing and crossbars are sold separately.
Shipping included in price.
Build your roof setup the right way with these GU Rail Sides, designed to suit Tier One-style systems and deliver a strong, low-profile foundation for your touring or work rig.
Now available in a premium 304 stainless steel option, offering improved durability and corrosion resistance while still finished in a clean satin black powder coat. Same proven design — just upgraded materials for those chasing longevity.
These rails are designed to sit tight to the roof, giving you a clean, tough look without the bulky feel of traditional racks.
Approx. 25mm off the roof
As low as 10–15mm clearance when paired with crossbars
Perfect for low-profile rooftop tent setups
Whether you’re bolting a tent straight on or running a full rack system, these rails give you the flexibility to set it up your way.
Start simple and expand as needed.
These rails are designed as part of a modular system, allowing you to:
Run direct rooftop tent mounting for the lowest profile
Add crossbars for extra versatility
Include a rear wing later for a cleaner finish and better weather protection
The rear wing also helps eliminate that annoying gap between your awning and tent — reducing water getting in during bad weather.
Designed to suit a wide range of setups:
Low Profile Light-Duty Crossbars
Great all-round option — lightweight and practical
Heavy-Duty RHS Crossbars (Low Profile)
Sits between rails for a super low stance
High-Profile Aluminium T-Slot Bars (80×25mm)
Ideal for heavier loads and modular accessories
Platform Racks
Compatible with racks like OCAM (some drilling may be required)
Direct Tent Mounting
Lowest profile option (may require minor tent mods)
Passenger-side rail comes pre-drilled with 3 awning mounting نقاط and includes flush rivnuts — making awning installs quick and easy.
3mm stainless steel construction
Satin black powder-coated finish
Designed to handle harsh Australian conditions
Also available in raw stainless steel if you’re chasing a custom finish.
This listing is for rail sides only
Rear wing and crossbars are sold separately
System is not currently load-rated — always check your tent/rack manufacturer specs
Internal rail width:
1135mm (front)
1120mm (rear)
Pre-drilled to suit OCAM platform racks
Most rooftop tents can be mounted directly
Compatible with many setups including CSS 1.2X tents
Supplied hardware:
20mm bolts (ideal for racks/thin bases)
May require longer bolts for thicker setups
Top Rail Length: 2100mm
Overall Length: 2190mm
External Width:
1265mm (front)
1250mm (rear)
Top Rail Width: 65mm
Roof Clearance: Approx. 25mm
Material: 3mm Stainless Steel
Finish: Satin Black Powder Coat
Hardware: 304 Stainless Steel
Weight: 12.5kg (pair)
Included: Rubber pinch weld + mounting hardware
Not sure if this setup suits your build?
Reach out and we’ll help you get it sorted before you buy — saves headaches later.
Current Dispatch Time: 4-6 Week Production Lead Time (High Demand)
Note: Rear wing and crossbars are sold separately.
Shipping included in price.
Build your roof setup the right way with these GU Rail Sides, designed to suit Tier One-style systems and deliver a strong, low-profile foundation for your touring or work rig.
Now available in a premium 304 stainless steel option, offering improved durability and corrosion resistance while still finished in a clean satin black powder coat. Same proven design — just upgraded materials for those chasing longevity.
These rails are designed to sit tight to the roof, giving you a clean, tough look without the bulky feel of traditional racks.
Approx. 25mm off the roof
As low as 10–15mm clearance when paired with crossbars
Perfect for low-profile rooftop tent setups
Whether you’re bolting a tent straight on or running a full rack system, these rails give you the flexibility to set it up your way.
Start simple and expand as needed.
These rails are designed as part of a modular system, allowing you to:
Run direct rooftop tent mounting for the lowest profile
Add crossbars for extra versatility
Include a rear wing later for a cleaner finish and better weather protection
The rear wing also helps eliminate that annoying gap between your awning and tent — reducing water getting in during bad weather.
Designed to suit a wide range of setups:
Low Profile Light-Duty Crossbars
Great all-round option — lightweight and practical
Heavy-Duty RHS Crossbars (Low Profile)
Sits between rails for a super low stance
High-Profile Aluminium T-Slot Bars (80×25mm)
Ideal for heavier loads and modular accessories
Platform Racks
Compatible with racks like OCAM (some drilling may be required)
Direct Tent Mounting
Lowest profile option (may require minor tent mods)
Passenger-side rail comes pre-drilled with 3 awning mounting نقاط and includes flush rivnuts — making awning installs quick and easy.
3mm stainless steel construction
Satin black powder-coated finish
Designed to handle harsh Australian conditions
Also available in raw stainless steel if you’re chasing a custom finish.
This listing is for rail sides only
Rear wing and crossbars are sold separately
System is not currently load-rated — always check your tent/rack manufacturer specs
Internal rail width:
1135mm (front)
1120mm (rear)
Pre-drilled to suit OCAM platform racks
Most rooftop tents can be mounted directly
Compatible with many setups including CSS 1.2X tents
Supplied hardware:
20mm bolts (ideal for racks/thin bases)
May require longer bolts for thicker setups
Top Rail Length: 2100mm
Overall Length: 2190mm
External Width:
1265mm (front)
1250mm (rear)
Top Rail Width: 65mm
Roof Clearance: Approx. 25mm
Material: 3mm Stainless Steel
Finish: Satin Black Powder Coat
Hardware: 304 Stainless Steel
Weight: 12.5kg (pair)
Included: Rubber pinch weld + mounting hardware
Not sure if this setup suits your build?
Reach out and we’ll help you get it sorted before you buy — saves headaches later.
